文章詳情
鹽霧環境對產品的影響
日期：2025-04-30 23:25
瀏覽次數：1997
摘要：
鹽霧環境對產品的影響
Salt is the world's one of the most common compounds. In theoceans,atmosphere, land surface, as well as lakes and rivers arefound insalt. Therefore, to avoid exposure to salt spray ispossible.Typically, the most severe impact in the coastal areas.Equipmentexposed to corrosive effects of the atmosphericenvironment can bedivided into three categories: corrosioneffects, electrical effectsand physical effects. Consider thefollowing typical questions helpdetermine whether this method isapplicable to subjects andequipment. The following issues do notinclude the full impact.
1. Corrosion
a, electrochemical reaction caused by corrosion.
b, accelerated stress corrosion.
c, salt ionization in water formed after the acid /alkalinesolution.
2. Electric effect
a, because of salt deposition caused by damage toelectronicequipment.
b, conductive layer generation.
c, insulating materials and metal corrosion.
3. Physical effects
a, mechanical parts and components activities, part oftheobstruction or adhesion.
b, lead paint blistering from the electrolysis.
http://mingtaicap.com/productID/product_detail-7288920.html
鹽是世界上*普遍的化合物之一。在海洋、大氣、陸地表面、以及湖泊和河流中均發現有鹽。因此，要避免暴露在鹽霧中是不可能的。通常，在沿海地區的影響*嚴酷。裝備暴露于腐蝕大氣環境的影響主要分為三類：腐蝕影響、電氣影響和物理影響?？紤]下列典型問題有助于確定本方法是否適用受試裝備。下列問題不包括全部影響。
1． 腐蝕影響
a、 電化學反應引起的腐蝕。
b、 加速應力腐蝕。
c、 鹽在水中電離后形成的酸/堿溶液。
2． 電氣影響
a、 由于鹽沉積引起電子裝備的損壞。
b、 導電層的產生。
c、 絕緣材料和金屬的腐蝕。
3． 物理影響
a、 機械部件和組件的活動部分的阻塞或粘連。
b、 由電解作用導致漆層起泡。
Salt spray environment,theimpact of the productSalt is the world's one of the most common compounds. In theoceans,atmosphere, land surface, as well as lakes and rivers arefound insalt. Therefore, to avoid exposure to salt spray ispossible.Typically, the most severe impact in the coastal areas.Equipmentexposed to corrosive effects of the atmosphericenvironment can bedivided into three categories: corrosioneffects, electrical effectsand physical effects. Consider thefollowing typical questions helpdetermine whether this method isapplicable to subjects andequipment. The following issues do notinclude the full impact.
1. Corrosion
a, electrochemical reaction caused by corrosion.
b, accelerated stress corrosion.
c, salt ionization in water formed after the acid /alkalinesolution.
2. Electric effect
a, because of salt deposition caused by damage toelectronicequipment.
b, conductive layer generation.
c, insulating materials and metal corrosion.
3. Physical effects
a, mechanical parts and components activities, part oftheobstruction or adhesion.
b, lead paint blistering from the electrolysis.
http://mingtaicap.com/productID/product_detail-7288920.html
